RackscaleData Center Institute
Search & browse all 146 entries

Liquid-to-Liquid Plate Heat Exchanger (BPHE / PHE)

#brazed-plate-heat-exchanger
Also called
  • plate heat exchanger
  • BPHE
  • plate-and-frame heat exchanger
  • CDU heat exchanger

Plain-English definition

A compact stack of corrugated stainless-steel plates, either gasketed in a bolted frame or copper/nickel-brazed, where warm secondary fluid and cold primary water flow through alternating counter-current channels to transfer heat rapidly without mixing fluids.

Why it matters on shift

Corrugated plates induce turbulence that achieves tight approach temperatures in a small footprint inside CDUs and waterside economizers, but narrow channels foul quickly if upstream strainers are neglected.

Illustrative operational example

Inside an illustrative 1 MW CDU, a counter-flow brazed-plate heat exchanger receives 16.0°C facility chilled water on its primary side and cools returning 33.0°C TCS coolant back down to 23.0°C.

Scope, code & safety boundary

Verify braze-filler compatibility (copper vs nickel-brazed or all-stainless fusion) with loop water chemistry and inhibitors, and monitor plate differential pressure for early fouling trends.

Related courses & interactive lab practice

AdvancedRS-203~85 min open lessons
AI Density Lab

High-density AI cooling & commissioning

BeginnerRS-103~85 min open lessons
Thermal Reality

Air, chilled-water & liquid cooling

Free interactive simulator
Campus Shift · 6-Mission Browser Lab

Practice live readings and switching in "120 kW GPU Direct-to-Chip CDU & Strainer Lab" with no login required.

Primary standards & technical references

Practice with the equipment

Try this concept in a live scenario.

Walk through six free guided browser missions in Campus Shift, or study all nine self-paced courses from Beginner to Advanced at $399 self-paced tuition ($1,600 list, save $1,201).